Ok even I messed up on the series numnbers

Goyen valves has Just announced the introduction of a new diaphragm valve; The "Series 4".
The picture above shows the old style valves next to the Series 4.

We have put in a lot of valves over the past 12 years, and finally there is a design that" makes sense".   Gone is the diaphragm spring which always has been a challenge.  It always seemed that the spring  was the piece I would drop off the top of a silo when trying to repair a diaphragm valve.  They have also went back to the bolt design to hold on the front face.  I likes the bolts because the valve seated very easily, and the valve does not get corrosion on the threads common to the Series 3 valve (which made it difficult to open)

Visit our web site.

The millennium or Series three valve I always hated.  I have never liked the small keeper pin or having to carry up a pipe wrench to the top of a building (using a man ladder) to remove the front of the valve.
The keeper was just another thing to hold in my teeth while balancing off of a ladder to reach the top of the dust collector.  I am sure you know what I mean.

Good job on the new Series 3 guys

Goyens anouncement of the Series 4 diaphragm valve

Find Goyen valves at discount prices

I love this new valve......Finally a great design.
Below is the announcement from Goyen on the new "Series 4".

Dear Valued Customer,

Tyco Environmental is in the process of developing a new generation of pulse valves.  The new generation of pulse valves is called the 4 Series.  The 4 Series will be introduced to the market over the next 2 years on an inlet size by inlet size basis.

The first inlet size of the new generation 4 Series pulse valves to be introduced is the 25 mm or 1 inch size valve.  The 1 inch 4 Series valves will be replacing the current Goyen DD, FS and T style diaphragm valves.

The new 4 Series valves will have the same center to face dimensions as the current Goyen diaphragm valves that they will be replacing.  The 1 inch 4 Series valves will all have a springless shockwave diaphragm design. 

Below is a table that shows the current 1 inch current Goyen diaphragm valve part numbers along with the new 4 Series part numbers that will be replacing them.  This is a list of the products that will be stocked in Goyen’s Lakewood NJ warehouse.  Other part numbers can be provided on a make to order basis:   

Current Goyen 1” Part Numbers	New 4 Series Part Numbers
RCA25DD001	RCAC25DD4001
RCAC25DD3001	RCAC25DD4001
CA25DD000	RCAC25DD4002
RCA25DD200	RCAC25DD4002
RCAC25DD3000	RCAC25DD4002
RCAC25FS000	RCAC25FS4002
RCAC25FS3000	RCAC25FS4002
RCAC25T3001	RCAC25T4001
CA25T100	RCAC25T4002
RCA25T200	RCAC25T4002
RCA25TX/2981	RCAC25T4002
RCAC25T3000	RCAC25T4002

Frequently Asked Questions

When will the new 4 Series be available to order?

The new 4 Series will be available to order on May 15, 2012.

When will the current Goyen 1” diaphragm valves be discontinued?

The current Goyen 1” diaphragm valves will no longer be available after August 30, 2012.

How long will Goyen support the installed base with spare parts?

Goyen is planning to support the installed base with spare parts for the foreseeable future.

How does the pricing of the 4 Series compare to the current 1 inch Goyen diaphragm valves?

The 4 Series valves will be priced the same as the current Goyen 3 Series diaphragm valves that they are replacing.

How does the 4 Series performance compare with the current 1 inch Goyen diaphragm valves?

The 4 Series meets the performance characteristics of the 1 inch Goyen 3 Series Millennium style diaphragm valves.  The 4 Series also exceeds the performance characteristics of the previous generation of Goyen 1 inch diaphragm valves.

Included in this product introduction announcement are three separate 2 page 4 Series technical data sheets.  There is a technical data sheet for the DD end connection style 4 Series diaphragm valve, a technical data sheet for the FS end connection style 4 Series diaphragm valve and a technical data sheet for the T end connection style 4 Series diaphragm valve.  The technical data sheets include information on dimensions, materials of construction, ordering codes and spare parts kits.

For product information on 4 Series please visit our website at: http://www.cleanairsystems.com/products/pulse_jet_filter_cleaning_solutions/diaphragm_valves/4_series_valve

The product introduction announcement also contains the Goyen Valve Diaphragm Valve catalog that contains the information for the current 1 inch Goyen diaphragm valves.

If you require any additional information, please contact your local Goyen Valve Regional Manger, or our Lakewood New Jersey offices.

Regards,

Stephen J. O’Neill

President Tyco Environmental Systems Americas